论文专著
近五年以唯一著者身份出版专著及唯一通讯作者身份发表SCI收录论文：
1. 向道平, 新型黏结相钨合金及其强化技术, 北京: 冶金工业出版社, 2025.
2. Ziyu Gui, Juan Rong, Daoping Xiang*, Photothermal application of photovoltaic silicon waste in preparing an efficient solar water evaporator, ACS Applied Materials & Interfaces, 2026,18: 6926-6936.
3. Juan Rong, Ziyu Gui, Daoping Xiang*, Novel photothermal application of medium-entropy transition metal carbide in interfacial solar water evaporation, Desalination, 2026, 623: 119865.
4. Ziyu Gui, Juan Rong, Daoping Xiang*, Application of novel nano titanium solid solution carbide photo-thermal powders in preparing efficient solar water evaporator, Separation and Purification Technology, 2026, 386: 136599.
5. Jingming Liu, Daoping Xiang*, Ruipeng Mao, Dual-phase strengthening in tungsten alloys with VCoNi medium-binder phase: solid-solution and oxide dispersion effects, International Journal of Refractory Metals and Hard Materials, 2026,135: 107563.
6. Tianrun Hu, Daoping Xiang*, Ziyu Gui, Wei Xu. Significantly enhanced thermal conductivity of epoxy composites by in-situ growing AlN whiskers in pre-constructed Si3N4-AlN network skeleton, Advanced Composites and Hybrid Materials, 2025, 8: 362.
7. Guangming Pan, Daoping Xiang*, Lulu Hu, Ruipeng Mao. Enhanced mechanical properties of Co-containing W-Ni3Al alloy by trace Y2O3 addition, Journal of Alloys and Compounds, 2025, 1010: 177769.
8. Mengting Ye, Daoping Xiang*, Ziyu Gui. Thermal conductivity enhancement of epoxy by a 3D Si3N4 crystal rod/grain skeleton fabricating from photovoltaic silicon waste, Ceramics International, 2024, 50: 53780-53789.
9. Ruipeng Mao, Daoping Xiang*. Improving mechanical properties of W-Ni3Al alloy through Zr element addition: Solid-solution and oxide particle strengthening, Journal of Alloys and Compounds, 2024, 1002: 175240.
10. Jian Yao, Daoping Xiang*. Facile preparation of heat-conducting ceramics/epoxy composites by pre-constructing Si3N4-SiC skeleton from photovoltaic silicon waste, Ceramics International, 2024, 50: 33725-33735.
11. Ziyu Gui, Zirui Yang, Daoping Xiang*. An efficient hierarchical solar water evaporator with polypyrrole-enabled light trapping on surface-carbonized pulp foam matrix, Solar Energy Materials and Solar Cells, 2024, 274: 112997.
12. Ziyu Gui, Zirui Yang, Daoping Xiang*. Tree-inspired coir fiber-based array evaporator with rapid water transportation and effective solar water evaporation, Chemical Engineering Journal, 2024, 494: 153010.
13. Zirui Yang, Ziyu Gui, Daoping Xiang*. A highly efficient melamine foam-based solar evaporator with double-photothermal-converting and fast water transportation, Desalination, 2024, 577: 117396.
14. Lulu Hu, Daoping Xiang*, Ruipeng Mao, Ziyu Gui. Microstructure evolution and mechanical property of W-Ni3Al alloy by adding minor Co element, Journal of Alloys and Compounds, 2024, 976: 173286.
15. Manshu Liu, Daoping Xiang*. A low-cost approach for fabricating thermally conductive SiC/polymer composites by pre-constructing ceramic skeleton from photovoltaic silicon waste, Sustainable Materials and Technologies, 2023, 38: e00761.
16. Ruipeng Liu, Daoping Xiang*. Low-temperature synthesis of mullite by molten molybdenum trioxide assisted mesoporous aluminum source dissolution, Ceramics International, 2023, 49: 27688-27696.
17. Ruipeng Mao, Daoping Xiang*. Preparing W-Ni3Al alloy at low sintering temperature by adding MoO3: Microstructure, mechanical properties, and salt spray corrosion, Journal of Alloys and Compounds, 2023, 956: 170306.
18. Ziyu Gui, Zirui Yang, Daoping Xiang*. Efficient solar water evaporation enabled by Ti3O5/Ti4O7-based melamine-urea–formaldehyde aerogel evaporators, Chemical Engineering Journal, 2023, 466: 143055.
19. Ziyu Gui, Daoping Xiang*. Hierarchically designed evaporators with dual-layered hydrogel/aerogel structure for efficient solar water evaporation, Separation and Purification Technology, 2023, 310: 123237.
20. Ruipeng Mao, Daoping Xiang*. Significantly elevated strength of W-Ni3Al alloy by adding trace boron element, International Journal of Refractory Metals and Hard Materials, 2023, 111: 106091.
21. Ruipeng Mao, Daoping Xiang*. Enhancement of mechanical properties of tungsten alloy via disordered microstructure and solid solution strengthening, Materials & Design, 2023, 225: 111468.
22. Liangqing Wu, Daoping Xiang*. Novel in-situ constructing approach for vertically aligned AlN skeleton and its thermal conductivity enhancement effect on epoxy, Ceramics International, 2023, 49: 5707-5719.
23. Ruipeng Mao, Daoping Xiang*. Improved mechanical properties of tungsten alloy by flaky Ni3Al and trace B2O3 synergistic reinforcement, Journal of Alloys and Compounds, 2022, 923: 166467.
24. Li Liu, Daoping Xiang*, Liangqing Wu. Improved thermal conductivity of ceramic-epoxy composites by constructing vertically aligned nanoflower-like AlN network, Ceramics International, 2022, 48: 10438-10446.
25. Ruipeng Mao, Zhishuai Fan, Daoping Xiang*. Enhanced mechanical properties of tungsten alloy by synergistic strengthening of flaky Ni3Al and Al2O3 nano-particles, Journal of Alloys and Compounds, 2022, 898: 162790.
26. Nannan Zhang, Daoping Xiang*. Self-assembling of versatile Si3N4@SiO2 nanofibre sponges by direct nitridation of photovoltaic silicon waste, Journal of Hazardous Materials, 2021, 419: 126385.
27. Ruipeng Liu, Daoping Xiang*. Recycling photovoltaic silicon waste for fabricating porous mullite ceramics by low-temperature reaction sintering, Journal of the European Ceramic Society, 2021, 41: 5957-5966.
28. Rong Ren, Daoping Xiang*, Yue Cao, Yuhang Hu. In-situ growth and relevant mechanisms of thick SiC nanowhiskers from hybrid silicon sources, Journal of Alloys and Compounds, 2021, 857: 157577.
29. Rong Ren, Ruipeng Mao, Daoping Xiang*. Fast preparation of ultrafine SiC crystals from silicon cutting waste and biomass, Waste and Biomass Valorization, 2021, 12: 4615-4621.
30. Weiran Liu, Jinsai Tian, Daoping Xiang*, Ruipeng Mao, Benxue Wang. Fabricating superior thermal conductivity SiC-AlN composites from photovoltaic silicon waste, Journal of Cleaner Production, 2020, 274: 122799.
31. Zhiheng Xing, Yuhang Hu, Daoping Xiang*, Yanping Ma. Porous SiC-mullite ceramics with high flexural strength and gas permeability prepared from photovoltaic silicon waste, Ceramics International, 2020, 46: 1236-1242.
发明专利
近五年授权第一发明人国家发明专利：
1.向道平, 胡天润. 一种氮化硅-氮化铝聚合物复合材料及其制备方法. 2026-05-29, 中国, 专利号: ZL 202410488362.3.
2.向道平, 杨子锐, 桂子玙. 一种高效太阳能水蒸发器及其制备方法和应用. 2026-05-26, 中国, 专利号: ZL 202410488424.0.
3.向道平，桂子玙，荣娟. 一种基于光伏晶硅废料的太阳能水蒸发器及其制备方法和应用, 2026-03-27, 专利号: ZL 202411015779.4.
4.向道平, 伍良晴. 一种原位氮化铝框架/聚合物复合材料及其制备方法, 2026-03-17, 专利号: ZL 202111614947.8.
5.向道平，刘曼姝. 一种碳化硅框架/聚合物复合材料及其制备方法, 2026-01-30, 专利号: ZL 202111614981.5.
6.向道平，胡璐璐，毛瑞鹏. 一种钴增强W-Ni3Al合金及其制备方法, 2025-07-25, 专利号: ZL 202111681807.2.
7.向道平, 毛瑞鹏. 一种细晶高强高硬钨合金及其制备方法, 2024-07-19, 专利号: ZL 202111109676.0.
8.向道平, 毛瑞鹏. 一种硼元素增强含铝金属间化合物粘结钨合金及其制备方法, 2024-07-12, 专利号: ZL 202111112737.9.
9.向道平, 张楠楠. 一种多功能陶瓷纳米纤维海绵及其制备方法, 2023-06-09, 专利号: ZL 202110178357.9.
10.向道平, 刘瑞鹏. 一种多孔莫来石陶瓷及其制备方法, 2023-04-11, 专利号: ZL 202110183298.4.
11.向道平，赵书宁. 一种放电等离子辅助热解制备碳纳米管的方法, 2022-09-13, 专利号: ZL 201810185973.5.
12.向道平, 刘藜. 一种氮化铝纳米花/聚合物复合材料及其制备方法, 2022-06-14, 专利号: ZL 202110228827.8.
13.向道平, 刘伟然. 一种高导热SiC-AlN复合陶瓷的制备方法, 2022-06-07, 专利号: ZL 201911398616.8.
14.向道平, 李慧. 一种微波碳热还原制备复合Ti(C,N)金属陶瓷粉体的方法, 2021-12-28, 专利号: ZL 201810371181.7.
15.向道平, 樊志帅, 樊峰嵩. 一种片状金属间化合物增强细晶钨合金及其制备方法, 2021-11-23, 专利号: ZL 201911127282.0.
16.向道平, 任蓉, 曹月. 一种利用混杂硅源制备碳化硅纳米晶须的方法, 2021-10-19, 专利号: ZL 201911326176.5.
17.向道平, 邢志恒. 一种利用晶硅废砂浆制备碳化硅多孔陶瓷的方法, 2021-10-19, 专利号: ZL 201810185955.7.
18.向道平, 李慧, 王钰午, 涂国鹏. 一种超细多元复合陶瓷粉体及其制备方法, 2020-08-11, 专利号: ZL 201610225001.5.
19.向道平, 曹月. 一种利用晶硅切割废砂浆制备碳化硅纳米晶须的方法, 2020-06-16, 专利号: ZL 201710661415.7.
20.向道平, 李慧. 一种多元复合Ti(C,N)金属陶瓷及其制备方法, 2020-05-15, 专利号: ZL 201710034563.6.
成果转化
近五年转让专利：
1.向道平, 李慧, 潘艳林. 一种用于压力烧结的模具, 2019-09-06, 专利号: ZL 201610222540.3.
